1- Cold traffic color plastic resins. These resins are based on methacrylate monomers and two components of them are used in making cold traffic colors. The paint made on the basis of these resins is resistant to atmospheric conditions, strong, flexible and resistant to chemicals, including salts and various types of fuel. The resin contains paraffin, which comes to the surface during long-term storage at low temperatures. For this reason, mixing should be done before use. In the system designed in Takresin, Tacryl RM965 is the main resin and Tacryl AC100 acts as an accelerator, which should be added to the color made in the main resin when applying the color and the mixing process is done well. Benzoyl peroxide powder is used as a hardener in this system. The paint made by this system can be used to create pedestrian lines, paint speed bumps and create direction arrows and warning signs on the street floor. These colors are usually applied in a thickness of 1.5-2.5 mm on asphalt or concrete surfaces. The system is completely solvent-free, so the wet and dry film thicknesses are almost equal. The hardening process is completed after 30 minutes and the surface will be ready for use.

2- Acrylic resins for making prostheses Tacryl PRO is a two-component resin based on methyl methacrylate monomer for making artificial body parts. Benzoyl peroxide powder is used as hardener in this system. The artificial member made of this resin has high strength and low weight in low thickness.

3- Additive to reduce composite shrinkage. This material is a solution of polymethyl methacrylate in styrene, which is used as an additive to reduce shrinkage and shrinkage of composite parts produced by BMC and SMC methods, especially in the production of automobile parts. Unsaturated polyester resin shrinks 7 to 9 percent by volume during baking. Therefore, molding by SMC and BMC methods causes the formation of an uneven, wrinkled and cracked surface, which can be easily solved by adding BM852 resin. is solved