MP144K
May 28, 2024
392H
May 28, 2024
Hydroxyl acrylic resin for the production of two-component coatings
Main PropertiesFilm propertiesConsumption guideSuggested use casesStorage conditionsTechnical information
| Appearance | clear liquid |
| Polymer Type | With the ability to form a cross link |
| Solvent | Butyl acetate |
| Solubility | Soluble in: aromatic hydrocarbons, esters, ketones and ethers |
| Partial solubility in: aliphatic hydrocarbons | |
| Color Hazen (APHA) (ASTM D-1209) Gardner (ASTM D-1544) | <70 <1 |
| Solid Percentage (ASTM D-1259) | 1 ∓ 55 |
| Acid Number (mg KOH/g) (ASTM D-1639) | 4-9 |
| Hydroxyl percentage (ASTM D-4274) | 1.8 |
| Viscosity in (cP) 25°C (ASTM D-562) | 900-1400 |
| Density in (g/ml) 25°C (ASTM D-1475) | 0.99 |
| ignition point (°C) (ASTM D-93) | 25 |
Film properties
• Refer to the suggested formulas for additional information. Solvents such as alcohol and glycol should not be used.
• This resin with high adhesion ability on different surfaces and excellent flexibility is used to make lining and two-component topcoats resistant to atmospheric factors, water, detergents and chemicals. It is recommended to harden at room temperature or by applying heat. • It has good compatibility with other hydroxyl resins.
• Store in closed containers below 35 degrees Celsius and in a well-ventilated place for a maximum of 12 months
