1210N
May 27, 2024
BM852
May 19, 2024
Hydroxyl acrylic resin for the production of two-component coatings
Main propertiesFilm propertiesConsumption guideSuggested use casesStorage conditionsTechnical information
| Appearance | Clear liquid |
| Type of Polymer | with the ability to form crosslinks |
| Solvent | Xylene |
| Solvent | Soluble in: aromatic hydrocarbons, esters, ketones and ethers |
| Partial solubility in | Aliphatic hydrocarbons |
| Color Hazen (APHA) (ASTM D-1209) Gardner (ASTM D-1544) | <50<1 |
| Solid percentage (ASTM D-1259) | 1 ∓ 60 |
| Acid number (mg KOH/g) (ASTM D-1639) | 5-10 |
| Hydroxyl percentage(ASTM D-4274) | 1.8 |
| Viscosity in(cP) 25°C (ASTM D-562) | 2000-3500 |
| Density in(g/ml) 25°C (ASTM D-1475) | 0.98 |
| Ignition point (°C) (ASTM D-93) | 25 |
• Good gloss • Excellent mechanical properties and good adhesion on different metals • Good outdoor durability and fast drying
• Refer to the suggested formulas for additional information. Solvents such as alcohol and glycol should not be used.
• This resin with high adhesion ability on different surfaces and excellent flexibility is used to make lining and two-component topcoats resistant to atmospheric factors, water, detergents and chemicals. It is recommended to harden at room temperature or by applying heat. • It has good compatibility with other hydroxyl resins.
• Store in closed containers, below 35 degrees Celsius and in a well-ventilated place, for a maximum of 12 months
